Hercules Metals Corp.: Hercules Metals Intersects 480 Meters of 0.47% Cu, 82 ppm Mo, including 55 Meters of 1.5% Cu

Toronto, Ontario--(Newsfile Corp. - October 10, 2024) - Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FSE: C0X) ("Hercules Metals" or the "Company") is pleased to announce multiple broad copper intercepts from its Phase III drilling program on the newly discovered Leviathan porphyry copper system in western Idaho ("Hercules" or the "Property").

Highlights

• 140-meter step-out delivers similar hypogene enrichment to discovery hole HER-23-05, including 55 m of 1.5% Cu, within a broader intercept of 480 meters of 0.47% Cu, 82 ppm Mo, representing the longest intercept reported to date.

• Additional step-out holes planned to test its potential northeast-southwest trend extending towards HER-24-12, as well as down-plunge to the southeast (Fig. 1).

• Large step-out drilling outlines a 1.6 km x 1.1 km oval-shaped enrichment blanket which remains open.

• Drilling continues to vector toward the potassic core of the system and test for additional centers to the east within a large untested soil anomaly.

• Legacy Drilling has successfully completed the first RC hole to significant depth in challenging ground, demonstrating the potential to increase drilling production and lower the overall costs.

• Drilling progresses with two diamond core rigs and one RC rig and remains financed through to the end of 2025.

Chris Paul, CEO and Director of the Company, noted: "We are pleased with the grade and continuity returned over broad intervals in the system. The phyllic cap and hypogene enrichment blanket have expanded now to 1.6 km x 1.1 km, leading to new interpretations of the potential geometry and scale of the system. We've been able to work through drilling challenges faced at the start of the season and are now seeing strong production with the addition of Legacy's RC rig. As production increases, it continues to generate new targets and vector us toward the core of the system.

As drilling moves into new target areas, we're able to further test extensions of the widespread hypogene enrichment blanket. Hypogene enrichment is a rare phenomenon that only occurs in a small number of systems globally, but can often significantly upgrade the overall metal endowment. It remains to be seen if it extends into an as yet undiscovered high-grade potassic core."

Table 1: Significant Intercepts¹

Hole ID	From (m)	To (m)	Interval (m)	Cu (%)	Ag (g/t)	Mo (ppm)
HER-24-01	256.37	411.24	154.87	0.44	10.87	64
including	256.37	339.85	83.48	0.67	18.88	67
including	256.37	286.51	30.14	1.11	48.48	32
HER-24-02	297.91	327.66	29.75	0.18	0.46	14
HER-24-03	207.9	224.52	16.62	0.47	0.67	6
HER-24-04	266.49	484.33	217.84	0.33	2.10	59
including	266.49	323.55	57.06	0.55	2.68	64
HER-24-06	471.53	509.32	37.79	0.53	17.9	97
AND	588.26	637.58	49.32	0.46	3.26	93
HER-24-08	242.32	721.77	479.55	0.47	0.67	82
including	242.32	388.62	146.3	0.84	0.77	61
including	242.32	296.88	54.56	1.47	0.95	39

Figure 1: Drill Plan with grade bars for copper (orange) and molybdenum (blue) for holes with assays received. Approximate surface projection of enrichment blanket shown in orange. System remains open. Potential planned holes shown in white collars.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9425/226235_62343671b4d50968_002full.jpg

Figure 2: 1:6500 scale view of drill holes in Figure 1, showing section lines for Figures 3 and 4.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9425/226235_62343671b4d50968_003full.jpg

Figure 3: Cross-section A - A' showing southwest dipping cover, erosional surface, leach cap and parallel enrichment blanket. The late porphyry dykes dip out of the page to the southeast, but have an apparent parallel dip as shown due to the orientation of the cross section.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9425/226235_62343671b4d50968_004full.jpg

Figure 4: Cross-section B - B' showing southwest-dipping unconformity. The thickest leach cap observed lies below 23-21, but pinches out by 24-06. The late porphyry thickens below 23-21 and dips out of the page to the southeast. The thickest bornite ever intercepted at Hercules occurs as a wedge of enrichment and possible relict potassic alteration above the late porphyry in 23-21. It was affected by leaching from above and therefore copper grades were not as high as other holes. It was then truncated by the late porphyry below. Planned holes will now test if the bornite wedge thickens down plunge to the southeast, as it departs from the thick leach cap and the top of the late porphyry dips deeper.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9425/226235_62343671b4d50968_005full.jpg

Spectral and Veining

Spectral readings taken throughout the porphyry system show a discernible pattern of increasing alteration temperature to the south and southeast. Drill holes HER-24-01 through -03, and 24-15 intersected low temperature phyllic and minor advanced argillic alteration, typical of the shallowest parts of a porphyry system. Veining in these holes is characterized by intense "D" vein stockworks, also typical of the margins of the system. Holes drilled to the south and southeast however intersect progressively higher temperature phyllic, and even observable relict potassic alteration. Densities of early quartz veins also increase in direct association with the increasing alteration temperatures. This pattern suggests that the Leviathan porphyry system has been tilted to the northwest.

Porphyry Intrusions

A quartz porphyry intrusion, interpreted to be a late phase of the porphyry system, is intersected in a number of drill holes. Preliminary modeling suggests a southeast plunging geometry, consistent with the interpretation that the system is tilted to the northwest. It also appears to pinch out to the northwest in a series of finger-like dykes. The late quartz porphyry is slightly grade dilutive relative to the volcanic wall rock, and drilling aims to target near its margins, or in its hanging wall, as it plunges off to the southeast. It should be noted that drilling has not yet identified the earliest porphyry intrusion, which is typically the highest grade and introduces the bulk of copper mineralization early in porphyry systems.

Drill Hole Summaries

HER-24-08 intersected strong mineralization in a 140-meter step-out northeast from 23-05. A trend of prospective mineralization has been noted from other holes drilled to the northeast, including HER-24-12. Additional drilling is warranted to test if the trend continues northeast of 24-12. Three core holes, HER-07, HER-24-09 and 24-09b, were lost in Jurassic cover, with HER-24-09 testing a step-out to the southwest of 23-05. Legacy's RC drill will use the same pad to test the southwest extension of the trend. HER-24-12 did not intersect late quartz porphyry, which adds to the targets prospectivity.

HER-24-01 was drilled into a low temperature halo of D veining to the northwest, but also overlapped the margin of the enrichment blanket and graded 155m of 0.44% Cu and 11 g/t Ag, including 30m of 1.11% Cu and 48 g/t Ag.

HER-24-04 intersected late quartz porphyry, grading 0.33% Cu over 218m, including 57m of 0.54% Cu within the enrichment blanket.

HER-24-05 was drilled into a circular chargeability low and intersected a low-grade plug of late quartz porphyry, with trace copper sulfide. High barren quartz vein densities in the plug suggest a potential deep core may have been faulted in here.

HER-24-06 tested a chargeability high outside of HER-24-05 and encountered hypogene enrichment followed by a short interval of late porphyry. Copper grade increases after exiting late porphyry into biotite altered volcanics. A badly damaged post-mineral fault zone forced the hole to be terminated in 0.6% Cu.

Silver-Lead-Zinc in Jurassic Cover Sequence

Broad zones of disseminated silver-lead-zinc occur within the Hercules Rhyolite, an important unit of the Jurassic cover sequence. Although no longer the primary target, with commodities prices on the rise, the near surface silver mineralization may play an important role in potential future development scenarios.

Table 2: Silver-Lead-Zinc in Cover Sequence

Hole ID	From (m)	To (m)	Interval (m)	Ag (g/t)	Pb (%)	Zn (%)	Pb+Zn (%)
HER-24-01	72.76	258.59	185.83	28.78	.09	.28	0.37
including	72.76	131.37	58.61	67.89	.28	.86	1.14
including	78.85	89.52	10.67	205.04	0.40	0.48	0.88
HER-24-04	118.45	133.65	15.20	24.40	0.21	1.29	1.50
HER-24-05	312.88	317.91	5.03	93.01	-	-	-
HER-24-08	3.02	96.68	93.66	9.88	0.19	0.17	0.36
including	42.4	96.7	54.30	13.04	0.25	0.13	0.38

Table 3: Reported Drill Hole Locations

Hole ID	Easting	Northing	Elevation	Depth (m)	Azimuth	Dip
HER-24-01	511023	4956683	1288	411.2	114.9	-69.7
HER-24-02	511283	4956956	1354	411.5	115.4	-70.2
HER-24-03	511132	4956841	1277	516.3	115.12	-69.8
HER-24-04	511203	4956466	1359	484.3	90.17	-68.4
HER-24-05	511237	4955710	1255	601.0	59.6	-75.3
HER-24-06	511206	4956076	1361	637.6	239.36	-75.6
HER-24-08	511289	4956754	1364	721.8	81.5	-70.2

Sample Analysis and QAQC

All drill core samples were prepped and analyzed at MSA Labs in Langley, British Columbia, an ISO 17025 and ISO 9001 certified laboratory. Samples were dried and crushed to 2mm, from which a 250g sub-sample split was then pulverized to 85% passing a 75 micron sieve. Following preparation, assays were determined by the IMS-230 method. A 0.25g aliquot of the prepared pulp was digested in a 4-acid solution consisting of hydrochloric, nitric, perchloric and hydrofluoric acids. 4-acid is a near total digest and only the most highly resistant minerals are not dissolved. The resulting solution was analyzed via ICP-MS and ICP-ES for 48 elements and was corrected for inter-element spectral interferences. Lower detection limits for this procedure are 0.01 ppm for silver, 0.5 ppm for lead, 2 ppm for zinc, and 0.2 ppm for copper. Mercury is not reported due to volatilization in reaction with hydrofluoric acid and gold is not reported due to the small, 0.25g aliquot size being insufficient to overcome the nugget effect.

Gold was analyzed by FAS-111, a 30-gram fire assay fusion with AAS finish. No significant results were reported.

Samples with initial results beyond the upper detection limit of the IMS-230 method were analyzed by procedures ICF-6Ag, ICF-6Cu, ICF-6Pb and ICF-6Zn. The thresholds are 100 ppm for silver, and >1% for copper, lead and zinc.

MSA Labs employs internal quality control standards, duplicates and blank samples at set frequencies.

Blind certified reference materials (CRMs) and blank samples were systematically inserted by the Company into the sample stream and analyzed as part of the Company's quality assurance/quality control protocol.

Qualified Person

The scientific and technical information in this news release has been reviewed and approved for disclosure by Christopher Longton BS, CPG, Hercules' Vice President, Exploration. Mr. Longton is a "Qualified Person" for Hercules Metals within the meaning of National Instrument 43-101 - Standards of Disclosure for Mineral Projects.

About Hercules Metals Corp.

Hercules Metals Corp. (TSXV: BIG) (OTCQB: BADEF) (FSE: C0X) is an exploration Company focused on developing Idaho's newest copper and silver district.

The 100% owned Hercules Project located northwest of Cambridge, hosts the newly discovered Leviathan porphyry copper system, one of the most important discoveries in the region to date. The Company is well positioned for growth through continued drilling, supported by extensive historical and current exploration and a strategic investment by Barrick Gold.

With the potential for significant scale, the Company's management and board of directors aims to build on its proven track record which includes the discovery and development of numerous precious metals projects worldwide.

For further information please contact:

Nisha Hasan
Investor Relations
Telephone [phone]
Email: [e-mail]

Chris Paul
CEO & Director
Telephone [phone]
Email: [e-mail]

This news release does not constitute an offer to sell or a solicitation of an offer to buy any of the securities in the United States. Any securities referred to herein have not and will not be registered under the United States Securities Act of 1933, as amended (the "U.S. Securities Act") or any state securities laws and may not be offered or sold within the United States or to U.S. Persons unless registered under the U.S. Securities Act and applicable state securities laws of an exemption from such registration is available.

Disclaimer for Forward-Looking Information

This news release contains certain information that may be deemed "forward-looking information" with respect to the Company within the meaning of applicable securities laws. Such forward-looking information involves known and unknown risks, uncertainties and other factors that may cause the Company's actual results, performance or achievements, or developments in the industry to differ materially from the anticipated results, performance or achievements expressed or implied by such forward-looking information. Forward-looking information includes statements that are not historical facts and are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends," "estimates," "projects," "potential" and similar expressions, or that events or conditions "will," "would," "may," "could" or "should" occur. Forward-looking information contained in this press release may include, without limitation, the expected execution of future exploration programs on the Property; assay results of future drill holes; results of operations, and the expected financial performance of the Company.

Although the Company believes the forward-looking information contained in this news release is reasonable based on information available on the date hereof, by its nature, forward-looking information involves assumptions and known and unknown risks, uncertainties and other factors which may cause our actual results, level of activity, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking information.

Examples of such assumptions, risks and uncertainties include, without limitation, assumptions, risks and uncertainties associated with general economic conditions; the Covid-19 pandemic; adverse industry events; the receipt of required regulatory approvals and the timing of such approvals; that the Company maintains good relationships with the communities in which it operates or proposes to operate, future legislative and regulatory developments in the mining sector; the Company's ability to access sufficient capital from internal and external sources, and/or inability to access sufficient capital on favorable terms; mining industry and markets in Canada and generally; the ability of the Company to implement its business strategies; competition; the risk that any of the assumptions prove not to be valid or reliable, which could result in delays, or cessation in planned work, risks associated with the interpretation of data, the geology, grade and continuity of mineral deposits, the possibility that results will not be consistent with the Company's expectations, as well as other assumptions risks and uncertainties applicable to mineral exploration and development activities and to the Company, including as set forth in the Company's public disclosure documents filed on the SEDAR+ website at www.sedarplus.ca.

THE FORWARD-LOOKING INFORMATION CONTAINED IN THIS PRESS RELEASE REPRESENTS THE EXPECTATIONS OF HERCULES METALS AS OF THE DATE OF THIS PRESS RELEASE AND, ACCORDINGLY, IS SUBJECT TO CHANGE AFTER SUCH DATE. READERS SHOULD NOT PLACE UNDUE IMPORTANCE ON FORWARD-LOOKING INFORMATION AND SHOULD NOT RELY UPON THIS INFORMATION AS OF ANY OTHER DATE. WHILE HERCULES METALS MAY ELECT TO, IT DOES NOT UNDERTAKE TO UPDATE THIS INFORMATION AT ANY PARTICULAR TIME EXCEPT AS REQUIRED IN ACCORDANCE WITH APPLICABLE LAWS.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this press release.

_________________________
¹ Drill hole HER-24-07 was lost in Jurassic cover. HER-24-05 returned no significant results.

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/226235

SOURCE: Hercules Metals Corp.